Product ID:LATEX SEMI-GLOSS PAINT, 4300
MSDS Date:07/06/1992
FSC:8010
NIIN:01-306-6917
Status Code:A
MSDS Number: CKFZY

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

Telephone: 310-531-0131

Cage: 5G582

ETHYLENE GLYCOL ( VP = 0.1 MM HG @ TEMP )

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 50 PPM

ACGIH TLV: 50 PPMM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Health Hazards Acute and Chronic:INHALATION MAY CAUSE HEADACHE AN
NAUSEA. EYE CONTACT FLUSH WITH PLENTY OF CLEAN WATER FOR 5-10
MINUTES.
Effects of Overexposure:INHALATION HEALTH RISKS AND SYMPTOMS OF
EXPOSURE: MAY CAUSE HEADACHE AND NAUSEA, DIZZINESS. SKIN AND EYE
CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: PRIMARILY AN
IRRITANT. REDNESS OR RASH ON SK IN. WASH AFFECTED AREAS
THOROUGHLY WITH PLENTY OF WATER. SKIN ABSORPTION HEALTH RISKS AND
SYMPTOMS OF EXPOSURE: PRIMARILY AN IRRITANT. REDNESS OR RASH ON
SKIN. BE SURE TO WASH AFFECTED AREAS WITH PLENTY OF SOAPY WATER.
REMOVE CONTAMINATED CLOTHING. INGESTION HEALTH RISKS AND SYMPTOMS
OF EXPOSURE: NAUSEA, DIZZINESS, HEADACHES.

First Aid:REMOVE PATIENT TO FRESH AIR. FLUSH EYES WITH CLEAN WATER FOR
10 MINUTES. REMOVE SATURATED CLOTHING AND WASH SKIN WITH SOAPY
WATER THOROUGHLY. IF SWALLOWED, INDUCE VOMITING WITH 1-OZ OF SYRUP
OF IPE CAC FOLLOWED IN 5 MINUTES WITH GLASS OF WATER. CALL A
DOCTOR.

Flash Point:=116.1C, 241.F
241 DEG. F
Lower Limits:3.2%
Upper Limits:15.3%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION.

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT MATERIAL-
SAWDUST, SAND, CLAYS,ECT. AND FLUSH SPILL AREA WITH LOTS OF WATER.

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
USE STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING.
Other Precautions:KEEP FROM FREEZING. DO NOT TAKE INTERNALLY.

Respiratory Protection:THE USE OF NIOSH/MSHA APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOWS AND DOORS OR USE MEANS TO INSURE FRESH
AIR ENTRY DURING APPLICATION AND DRYING.
Ventilation:PROVIDE ADEQUATE VENTILATION AT ALL TIMES DURING HANDLING
AND APPLICATION OF THIS PRODUCT. INSURE ADEQUATE SUPPLY OF FRESH
AIR AT ALL TIMES.
Protective Gloves:BURUS N
Eye Protection:WEAR CHEMCIAL GOGGLES AT ALL TIMES WHEN HANDLING OR
APPLYING THIS PRODUCT.
Other Protective Equipment:WEAR MASKS AND GLOVES IF NECESSARY TO
PREVENT PROLONGED CONTACT WITH THE MATERIAL.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health

Boiling Pt:=197.2C, 387.F
B.P. Text:387 DEG. F.
Vapor Density:>AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ET
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT & COLORS - SLIGHT AMMONIA SMELL

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURES AREAS.

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55 GAL METAL DRUMS AND DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.